Installing configuring OS 2; misc. hardware drivers

installing os2, configuring os2, drivers os2, os 2 drivers, download os2, os 2 virtual pc, os 2 config sys

ISDN TeleS PnP driver problem

I have installed TeleS in win95 and it works.
So I know it’s not the card.

I have installed drivers for OS/2 and under boot it comes up with all
ok’s.
but when i try to use this thingy, it say’s the capi drivers have not
been loaded, It just said ok under booting!, now why is that?

Can anyone please help me out here?


Regards John.
———————————–
Name:  John Flood
E-Mail:  jsfl…@online.no
Hompage: http://oleg.hiof.no/~johnf
HAM:  LB4UE
OS:  OS/2 Warp
"Bad hair day".  (Got it? I did’nt)
———————————–

.
posted by admin in Uncategorized and have Comments (5)

5 Responses to “ISDN TeleS PnP driver problem”

  1. admin says:

    In <34A3FCC2.B0278…@online.no>, John Flood <jsfl…@online.no> writes:
    >I have installed TeleS in win95 and it works.
    >So I know it’s not the card.

    >I have installed drivers for OS/2 and under boot it comes up with all
    >ok’s.
    >but when i try to use this thingy, it say’s the capi drivers have not
    >been loaded, It just said ok under booting!, now why is that?

    >Can anyone please help me out here?

    Sorry, AFAIK 16.3 pnp *DOES NOT* run under Warp!
    Maybe get the 16.3 non pnp or ….

            Armin

    ———–Armin Pollak—-Universitaet der Bundeswehr Muenchen
    Telefon: 089 / 6004 3502     Werner-Heisenberg-Weg 39,
    FAX:      089 / 6004 3397       85577 Neubiberg, Deutschland
    email:    pol…@informatik.unibw-muenchen.de

  2. admin says:

    I said I was to run OS/2 Warp when i got the card, they would send me
    drivers for OS/2….
    No wonder they have’nt sendt the drivers yet, they have not got any :)

    Ok thanks, I’ll take a phoncall now…

    - Hide quoted text — Show quoted text -

    pol…@informatik.unibw-muenchen.de wrote:
    > In <34A3FCC2.B0278…@online.no>, John Flood <jsfl…@online.no> writes:
    > >I have installed TeleS in win95 and it works.
    > >So I know it’s not the card.

    > >I have installed drivers for OS/2 and under boot it comes up with all
    > >ok’s.
    > >but when i try to use this thingy, it say’s the capi drivers have not
    > >been loaded, It just said ok under booting!, now why is that?

    > >Can anyone please help me out here?

    > Sorry, AFAIK 16.3 pnp *DOES NOT* run under Warp!
    > Maybe get the 16.3 non pnp or ….

    >         Armin

    > ———–Armin Pollak—-Universitaet der Bundeswehr Muenchen
    > Telefon: 089 / 6004 3502     Werner-Heisenberg-Weg 39,
    > FAX:      089 / 6004 3397       85577 Neubiberg, Deutschland
    > email:    pol…@informatik.unibw-muenchen.de


    Regards John.
    ———————————–
    Name:  John Flood
    E-Mail:  jsfl…@online.no
    Hompage: http://oleg.hiof.no/~johnf
    HAM:  LB4UE
    OS:  OS/2 Warp
    "Bad hair day".  (Got it? I did’nt)
    ———————————–

  3. admin says:

    Due to my problem with TeleS PnP ISDN card.
    I have contacted my dealer, and they would send me a ZYXEL ISDN adapter.
    This adapter makes me able to use my old analog USR Sportster 28800
    plugged into the adapter, but i wonder if there is any problems with this
    produkt under OS/2 Warp?

    If so what is the produkt I could by to make it work?
    My needs:
        Playing with my friends, that uses analog modems.
        using fax and phone answering software.
        developing isdn software using capi.

    Regards John.
    ———————————–
    Name:  John Flood
    E-Mail:  jsfl…@online.no
    Hompage: http://oleg.hiof.no/~johnf
    HAM:  LB4UE
    OS:  OS/2 Warp
    "Bad hair day".  (Got it? I did’nt)
    ———————————–

  4. admin says:

    In article <34A902CC.1A5B9…@online.no> jsfl…@online.no "John Flood" writes:
    > Due to my problem with TeleS PnP ISDN card.

    OK, seen.  But WHY did you WANT a PnP card?  The non-PnP version works
    quite happily under Warp V4.

    > I have contacted my dealer, and they would send me a ZYXEL ISDN adapter.

    Why didn’t you get the dealer to swap the Teles card for the non-PnP
    version: that would have been the easiest course.  The drivers come with
    the card (well, they came with mine, when I bought it from a dealer in
    Hamburg).


    Brian {Hamilton Kelly}                                         b…@dsl.co.uk
            "The fundamental design flaws [of the products of the Micros^WSirius
            Cybernetics Corporation]  are completely hidden by their superficial
            design flaws."  SLATFATF 1983 — wasn’t Douglas Adams prescient?:-)

  5. admin says:

    Brian {Hamilton Kelly} wrote:
    > In article <34A902CC.1A5B9…@online.no> jsfl…@online.no "John Flood" writes:

    > > Due to my problem with TeleS PnP ISDN card.

    > OK, seen.  But WHY did you WANT a PnP card?  The non-PnP version works
    > quite happily under Warp V4.

    The dealer did not metion that the PnP card could’nt be used under Warp :(.

    > > I have contacted my dealer, and they would send me a ZYXEL ISDN adapter.

    > Why didn’t you get the dealer to swap the Teles card for the non-PnP
    > version: that would have been the easiest course.  The drivers come with
    > the card (well, they came with mine, when I bought it from a dealer in
    > Hamburg).

    Yes, that was an option, but seen’s i have not been able to communicate with an
    analog modem the card is useless for me.Fossil drivers do not communicate with
    analog modems, and TelesCom does not do the job!
    To Sloooow, and unstable.

    So I heard from the dealer that Hayes Zyxel ("adapter" as he called it) has 2
    analog contacts on it where i can plug inn a analog modem (i ges). I beleive the
    adapter is plugged into the com port.

    So I wonder if this "adapter" is supported under Warp?


    Regards John.
    ———————————–
    Name:  John Flood
    E-Mail:  jsfl…@online.no
    Hompage: http://oleg.hiof.no/~johnf
    HAM:  LB4UE
    OS:  OS/2 Warp
    "Bad hair day".  (Got it? I did’nt)
    ———————————–